Wood Products 01x08x12.SP.No2.KD.105 Siding Boards, 12 ft, Southern Pine, No. 2 Grade, Kiln Dried, Pattern #105
Videos
This Southern Pine lap siding board is a No. 2 grade, kiln dried product sized 12 feet long with nominal dimensions of 1 inch by 8 inches. Its nominal sizing is typical of softwood lap siding, and the listed actual measurements are 3/4 inch thick by 7-1/4 inches wide.
No. 2 grade lumber is intended for general construction where very high strength is not required and where serviceability matters. Some defects are permitted, and knots of any quality may appear as long as they are well spaced and within size limits.
The board is kiln dried to a moisture content of 19 percent or less. Pattern #105 gives the board a lap profile that creates a visible shadow line across the wall.
- Southern Pine species, a softwood popular in residential and commercial construction
- No. 2 grade for general construction use
- Kiln dried, moisture content of 19 percent or less
- Pattern #105 lap siding with an appealing shadow line effect
- Nominal size 1 in x 8 in x 12 ft
Use this board where a classic horizontal lap look is wanted on exterior walls. Confirm the actual dimensions and grade on delivery before ordering the full run.
Specifications
- Species: Southern Pine
- Grade: No. 2
- Seasoning: Kiln Dried
- Appearance: Pattern #105 Lap Siding
- Nominal Length: 12 ft
- Nominal Width: 8 in
- Nominal Thickness: 1 in
- Actual Length: 12 ft
- Actual Width: 7-1/4 in
- Actual Thickness: 3/4 in